DoorHan SHAFT-30 Kurulum Kılavuzu - Sayfa 5
Kapı Açıcı DoorHan SHAFT-30 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. DoorHan SHAFT-30 8 sayfaları. Ip65/60 ip65
Ayrıca DoorHan SHAFT-30 için: Manuel (12 sayfalar), Kurulum ve Kullanım Kılavuzu (12 sayfalar)
Sayfayı Yazdır
install the bigger sprocket wheel onto the door shaft end.
Fix the bracket on the wall with expansion bolts according to the length of the chain.
attach the door operator on the bracket with four m10 bolts. thread up the chain by adjusting the position of the operator.
6. Electrical
Wiring chart see Fig.5.
Wires within the cable shall be protected so that no damage can result from contact with any rough, sharp part. in order to protect electrical
elements from water, waterproof adapter must be tightened by turning the plastic nut.
Motor
u(Blue)
V(Brown)
W(Black)
1
2
Capacitor
C
C
oP(Green)
3
4
5
6
i n sta l l at i o n man u al s H aF t-3 0
Limit switch
Co(White)
Cl(Red)
7
8
INsTaLLaTION
Opened position signal output
ls(Yellow)
ls(Yellow)
9
0
5
5