DoorHan ARM 320 Kurulum ve Kullanım Kılavuzu - Sayfa 8

Kapı açma sistemi DoorHan ARM 320 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. DoorHan ARM 320 12 sayfaları. Operator
Ayrıca DoorHan ARM 320 için: Manuel (2 sayfalar)

Sayfayı Yazdır

4.7. STRAIGHT AND CURVED ARMS INSTALLATION

Insert the straight arm in the driving shaft of the reducer. Level the ends of the shaft and the arm, fix the washer using screw

M6×20 and fix the axis of the arm using 2 pairs of lock screws.

connect two arms using screw M8×16 and washer. unblock the reducer by turning the handle clockwise and secure the

curved arm to the clamp A using screw M12×50 and nut M12.

When installing the operator on the right leaf, follow the installation procedure as shown in the picture below.

eLeCtRICAL COnneCtIOns