DoorHan ARM 320 Kurulum ve Kullanım Kılavuzu - Sayfa 9
Kapı açma sistemi DoorHan ARM 320 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. DoorHan ARM 320 12 sayfaları. Operator
Ayrıca DoorHan ARM 320 için: Manuel (2 sayfalar)
Sayfayı Yazdır5. EXTREME pOSITION ADJUSTMENT
1) unblock the reducer and open the gate leaf
until the necessary position.
2) Turn the upper cam on the reducer shaft
until actuation (disconnection) of micro-
switch. close the leaf and fix the cam using
a screw.
3) unblock the reducer and close the gate leaf
leaving 100 mm before completely closed
position. Turn the bottom cam of reducer
until actuation of (closing) microswitch.
Open the leaf and fix the cam using a screw.
4) After the installation is completed, make all
electrical connections and adjustments of
the operator, put on the cover fixing it with
4 bolts.
6. EMERGENCy RELEASE OpERATION
Emergency release is used to release the motor in case of power cut. To release the motor, turn the handle by 90 degrees.
WARNING! Release the motor only if power supply is off. use of the release may cause uncontrolled movement of the
driven part due to mechanical failures or an out-of-balance condition.
eXtReMe pOsItIOn ADJustMent
9