Canon PIXMA MX420 Series Ağ Kurulumu Sorun Giderme - Sayfa 11
Hepsi Bir Arada Yazıcı Canon PIXMA MX420 Series için çevrimiçi göz atın veya pdf Ağ Kurulumu Sorun Giderme indirin. Canon PIXMA MX420 Series 34 sayfaları. Cartridge reset
Ayrıca Canon PIXMA MX420 Series için: Kurulum Kılavuzu (24 sayfalar), Teknik Özellikler (2 sayfalar), Ağ Kurulum Kılavuzu (14 sayfalar), Ağ Kurulum Kılavuzu (9 sayfalar), Kurulum (29 sayfalar), Manuel (4 sayfalar)
Sayfayı Yazdır
Other Troubleshooting Tips
Forgotten or Do Not Know the Access Point Name/Network Name
(SSID), Security Protocol (encryption standard), and Network Key
Check
Check the access point settings.
•
For details on how to check the settings of the access point, refer to the manual supplied with the
access point or contact its manufacturer.
The Machine is Not Detected after the Network Environment is
Changed
Check
Wait until the IP address is assigned to the computer. You may need to restart your
computer.
•
Search for the machine again after confirming a valid IP address is assigned to the computer.
Glossary
•
IP address
A numerical identification assigned to each computer or network device connected to a network.
0
Reference Information
Character Entry
Action
This machine allows you to enter characters using the Numeric buttons (A).
Follow the procedure below.
C
D
1
Press the
button of the Numeric buttons to switch to the character entry mode you
want to use.
•
Three character entry modes (numeric, upper case and lower case) are available. Each time
you press the
button, the entry mode displayed on the upper right of the screen changes
between numeric 123, upper case ABC and lower case abc.
2
Enter characters using the Numeric buttons.
•
Multiple characters are assigned to each key. Press a key to toggle character options for that
key. For details on assigned characters, refer to "Key Assignments" on page 11.
3
Repeat
and
to enter more characters.
A
B