Canon PIXMA MX850 Ağ Kurulum Kılavuzu - Sayfa 18
Hepsi Bir Arada Yazıcı Canon PIXMA MX850 için çevrimiçi göz atın veya pdf Ağ Kurulum Kılavuzu indirin. Canon PIXMA MX850 43 sayfaları. Multifunction brochure
Ayrıca Canon PIXMA MX850 için: Tamamlayıcı Kılavuz (6 sayfalar), Kurulum Talimatları (2 sayfalar), Broşür (2 sayfalar)
Sayfayı Yazdır
- 1. Setup Outline
- 2. Setting up the Machine and the Computer (Windows)
- 3. Preparing for Setup
- 4. Installing the Software
- 5. Setting up for Use over Wired Lan
- 6. Setting up the Machine and the Computer (Macintosh)
- 7. Cannot Connect to the Machine (the Machine Is Not Detected)
- 8. Setting up the Machine Again for Use over Network
Setting Up the Machine and the Computer
(Macintosh)
To use the machine connected to a computer, you need to install the software called "MP Drivers" in
the computer.
The following two connection types are described in this manual.
(A)
When the machine has not been connected to the network, perform this setup to use the machine
over wired LAN. This setup procedure requires settings to be performed on the machine and the
computer.
Note
To set up the machine that is not yet connected to a wired LAN, connect the machine and the
computer with a USB cable.
Even if the machine has been set up to be used with the USB connection, follow the setup
procedure described in this manual to connect the machine to a wired LAN for the first time.
Setting Up an Additional LAN-connected Computer
(A)
When the machine has already been set up to connect to the network, perform this setup to use
the machine from an additional computer over wired LAN. This setup procedure only requires
settings to be performed on the additional computer.
16
Setting Up the Machine and the Computer (Macintosh)
Setting Up for Use over Wired LAN
(B)
(B)
(A) This machine
(B) Hub or router
(C) Computer
(C)
(C)
(A) This machine
(B) Hub or router
(C) Connected computer
(D) Additional computer
(D)