Amerlux GRUV - 1.5 - GB-LED Kurulum Talimatları Kılavuzu - Sayfa 5

Aydınlatma Ekipmanları Amerlux GRUV - 1.5 - GB-LED için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Amerlux GRUV - 1.5 - GB-LED 6 sayfaları.

Sayfayı Yazdır

AMERLUX

LIGHTING SOLUTIONS

GRUV1.5-GB -LED - WALL/CEILING CORNER INSTALLATION (U-PATTERN)

Gyp Board

WARNING - RISK OF FIRE AND ELECTRICAL SHOCK. FIXTURE MUST BE INSTALLED BY A QUALIFIED ELECTRICIAN

ONLY. FIXTURE IS INTENDED FOR INSTALLATION IN ACCORDANCE WITH THE NATIONAL ELECTRICAL CODE, LOCAL

AND FEDERAL SPECIFICATIONS. DISCONNECT POWER AT ELECTRICAL PANEL BEFORE SERVICING .

Wall/Ceiling Corner Installation - "U" Pattern

HORIZONTAL

VERTICAL

LENGTH

SIDE COVERS (2)

SCREWS (4)

VERTICAL

FIXTURE

Amerlux, LLC. - 178 Bauer Drive, Oakland NJ 07436 - T: 973-882-5010 - F: 973-882-2605

ADAPT. ABILITY.

RETAIN THESE INSTRUCTIONS FOR MAINTENANCE REFERENCE.

LENGTH

L-PATTERN

1. Repeat steps 1-3 from L-Pattern Installation

sheet on page 4.

2. Once the fixture is secure, feed power source

through the knock-out.

Splice to harness according to code

3. Continue installing rest of Horizontal fixtures.

4. Install Horizontal fixture closest to corner.

A. Tighten screw to the Top Bracket. Slide Top

Bracket to wall and tighten optional self-drill

screws if necessary.

5. Install Vertical fixture closest to corner.

A. Remove Side Covers.

B. Mount fixture so top edge of extrusion on the vertical fixture

is flush with horizontal fixture. (Overlap min. of

Reference layout drawing for location.

C. Re-Install Side Covers

D. Remove Side Covers if max overlap is exceeded.

E. Secure fixtures following instructions from pages 1-3.

www.amerlux.com

INSTALLATION INSTRUCTIONS

SHEET #:

689-0512 (5 of 5)

VERTICAL

LENGTH

6. * Install wall (By Others)

7. Spackle in fixture.

8. Remove SHIPPING BRACE.

9. Snap-in LENS.

SPEC. SHEET

REFERENCE:

SCREW, 8-32 X 1/4

TOP (SLIDING) BRACKET

OPTIONAL SELF-DRILL SCREWS (2)

", max. 2

HORIZONTAL

FIXTURE