Ames Instruments 64014 Kullanım Kılavuzu ve Güvenlik Talimatları - Sayfa 10

Multimetre Ames Instruments 64014 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu ve Güvenlik Talimatları indirin. Ames Instruments 64014 16 sayfaları. Compact

Sayfayı Yazdır
Measurement Operation
note: Remove plugs from
ends of Test Leads (included)
before connecting to Meter.
ac/Dc Voltage Measurement
Measure AC conductors carrying up to 600 VAC, from 40 Hz to 400 Hz.
Measure DC conductors carrying up to 600 VDC.
WarninG! Use caution when working
near voltages above 30 VAC rms,
42 VAC peak, or 60 VDC. Voltages this
high present a risk of electric shock.
WarninG! To prevent damage
to the Meter or personal injury, do
not measure voltages higher than
600 VDC or 600 VAC rms.
1.
Plug black test lead into cOM Jack.
Plug red test lead into input Jack.
2.
Turn Rotary Switch to the
temperature Measurement
Measure temperature from -4°F to 1382
1.
Connect red end of Thermocouple
(included) to the input Jack and
the black end to the cOM Jack.
2.
Turn Rotary Switch to the temp
position. The Display will show
the current ambient temperature.
Press Func to switch between
Celsius and Fahrenheit.
3.
Touch the tip of the Thermocouple
to the object to be tested.
Page 10
position.
For technical questions, please call 1-888-866-5797.
note: Test Lead probes have removable
covers for overvoltage protection. With
covers in place, Test Leads are rated for
use with CAT III circuits. Exposed probes
are rated for use with CAT II circuits.
3.
Press Func Button to choose
between AC and DC voltage.
4.
While observing polarity, carefully
touch exposed conductors
with tips of probes.
5.
Read measured voltage on the Display.
• "OL" displayed on the Meter
indicates the measurement
exceeds the current range.
6.
When testing is complete, turn
Rotary Switch to OFF, remove
Test Leads and store with Meter.
F (-20°C to 750
C).
°
°
4.
Read measured temperature
on the Display.
5.
When is complete, turn Rotary
Switch to OFF remove Thermocouple
and store with Meter.
WarninG! To prevent electric
shock, remove Thermocouple before
switching between testing modes.
Item 64014