Ames Instruments 64014 Kullanım Kılavuzu ve Güvenlik Talimatları - Sayfa 9

Multimetre Ames Instruments 64014 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu ve Güvenlik Talimatları indirin. Ames Instruments 64014 16 sayfaları. Compact

Sayfayı Yazdır
ncV (non-contact ac Voltage) Button
The ncV function allows you to use the Meter for voltage detection.
1.
To activate, hold down the
ncV Button in any mode.
2.
Move the Meter close to the voltage
source or unshielded conductor. If
voltage is detected, the meter will
beep and the Non-Contact Voltage
Indicator will flash.
auto power-Off Operation
If the Meter is not used for approximately 15 minutes, it automatically turns
itself off to conserve battery power. To turn the Meter back on after auto-
off, press any Button or turn the rotary switch. To disable Auto Power-Off,
press and hold down the HOLD Button when powering on the Meter.
Item 64014
For technical questions, please call 1-888-866-5797.
3.
Release the ncV Button to
stop voltage detection.
WarninG! Even if no indication is
given, voltage may still be present.
Do not rely solely on NCV detection to
determine the presence of voltage.
Page 9