Canon 220P - imageFORMULA ScanFront Kullanıcı Kılavuzu - Sayfa 9

Tarayıcı Canon 220P - imageFORMULA ScanFront için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Canon 220P - imageFORMULA ScanFront 28 sayfaları. Scan-to-share
Ayrıca Canon 220P - imageFORMULA ScanFront için: Yazılım Güncellemesi (11 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Broşür ve Teknik Özellikler (33 sayfalar), Broşür ve Teknik Özellikler (6 sayfalar)

Sayfayı Yazdır

■ If the scanner makes strange noises, or gives off,

smoke, heat, or strange odors, or the scanner

does not function or other abnormalities occur

when you use the machine, immediately turn the

power OFF, and disconnect the power plug from

the power outlet. Then, contact your local

authorized Canon dealer or service representative

for further information.

■ Do not drop the scanner, or subject it to impact or

strong shock. Should the scanner ever become

damaged, immediately turn the power OFF, and

disconnect the power plug from the power outlet.

Then, contact your local authorized Canon dealer

or service representative to have the unit serviced.

■ Before moving the scanner, make sure to turn the

power OFF, and disconnect the power plug from

the power outlet.

CAUTION

■ Do not install the scanner on a surface that is

unstable or tilted, or in an area subject to

excessive vibrations, as this may cause the

scanner to fall, resulting in personal injury or

damage to the scanner.

■ Do not block the ventilation openings. Doing so

could cause the scanner to overheat, creating a

risk of fire.

■ Never place small metal objects such as staples,

paper clips, or jewelry on the scanner. These items

may fall into the scanner, and cause a fire or

electric shock. Should such objects ever fall inside

the scanner, immediately turn the power OFF, and

disconnect the power plug from the power outlet.

Then, contact your local authorized Canon dealer

or service representative to have the unit serviced.

■ Do not install the scanner in a humid or dusty

location. Doing so may result in a fire or electric

shock.

■ Do not place objects on top of the scanner, as they

may tip over and fall, resulting in personal injury.

■ Do not use the scanner with a power supply

voltage other than 220-240 VAC. Doing so might

cause fire or electric shock.

■ When disconnecting the power cord, grasp it firmly

by its plug. Do not pull directly on the power cord,

as this may damage or expose the cord's internal

wiring, resulting in a fire or electric shock.

■ Leave sufficient space around the power plug so

that it can be disconnected easily. If objects are

placed around the power plug, you will be unable

to disconnect it in an emergency.

■ Do not allow water or flammable substances

(alcohol, paint thinner, benzene, etc.) to spill into

the scanner, as this may result in a fire or electric

shock.

■ Turn OFF the power for safety when not using the

scanner for a long period of time, such as

overnight. Also, turn OFF the power, and

disconnect the AC adapter from the scanner and

disconnect the power cord from the power outlet

for safety when the machine will not be used for an

extended period of time, such as during

consecutive holidays.

■ Do not wear loose clothing or jewelry that may get

caught in the scanner while you are using it. This

may result in personal injury. Be extra careful of

neckties and long hair. If anything becomes caught

in the scanner, immediately disconnect the power

cord to stop the scanner.

■ Be careful when placing paper in the scanner and

when removing jammed paper. It is possible to cut

your hand on the edge of a sheet of paper.