COLE CL1350 Kullanım Kılavuzu - Sayfa 11

Plotter COLE CL1350 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. COLE CL1350 16 sayfaları. Cutting plotter

blade will be lifted up. Then the cutting plotter can't receive data

transmitted from the computer, but you may operate as follows:

Press the key "↑"or "↓",and you may remove the vinyl film

forward or backward;

b. Press the key"→"or"←",and you can move the carriage right or

left;

When you press the key "origin", the current location of the

blade will be defaulted as new work point;

4. Setup status

In online status, when you press the "Setup" key, the green light is on,

and you may set the baud rate of serial port. If you press "Setup" key

once more, it will restore to online status. NOTE: unless you are a

professional technician, it is not suggested to change this setting.

5. Copy status

Press "Offline", "Setup" and "Origin" key, the machine will re-cut all the

data output at the time of latest resetting. But the machine will NOT

re-cut anything, when the green "Reset" is light flashing, if the output

data is more than the buffer capacity. In this condition, you may press

"RESET" key to re-start cutter's work.

6. Pause status

Check cutting effect: With the unit on: press "Offline/Pause''

key, it will pause. You may move media by pressing"→","←"or"↓"key（but

do not press"↑"key） and check cutting effect. Repressing "Offline/Pause"

key will make the machine back to work.

b. Continue work at a new point: When the blade moves to a new

point, if you press "Origin" key instead of "Offline/Pause" key, the cutter

will continue work at this new point.

NOTE:

If something unusual happens, that you can't stop cutter's work,

please turn power off.

http://www.cncoletech.cn/

Cole Plotter User Manual