DOREMIDI MCV-10 Kullanım Kılavuzu - Sayfa 2

Medya Dönüştürücü DOREMIDI MCV-10 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. DOREMIDI MCV-10 10 sayfaları. Midi to cv box

Introduction

MIDI to CV box (MCV-10) is a product designed by DOREMiDi for converting MIDI signals into

analog voltages. The MCV-10 is used for MIDI control of analog synthesizers, Eurorack modules, and

more. The MCV-10 has USB MIDI and MIDI IN interfaces, which can be connected to a computer or

MIDI devices. MCV-10 supports V/Oct, Hz/V, 1.2V/Oct, S-Trig, V-Trig, and also supports various MIDI

CC controllers and auxiliary outputs for parameters.

Appearance

❶ Update Key: Press and hold the button, then connect the computer via USB, the product will enter the

update mode, and the indicator light will flash.

Press and hold for 5 seconds to restore factory settings, and the indicator light flashes 5 times.

❷ MIDI IN: MIDI-TRS 3.5mm interface, connect 3.5 to MIDI five-pin cable, input MIDI messages.

❸ USB: USB-C interface, with USB MIDI function, used to connect to a computer and supply power to

the product at the same time.

❹ GATE: Mono TRS 3.5mm interface, used to connect the GATE port of the synthesizer and output the

gate control signal.

❺ CV: Mono TRS 3.5mm interface, used to connect to the CV port of the synthesizer, and output the

gate analog voltage.

❻ AUX: Mono TRS 3.5mm interface, used to connect to the AUX port of the synthesizer, and output

analog voltage.

Product Parameters

3.1. Product Parameter Table

Name

Model

Size (L x W x H)

Weight

Consumption

USB Compatibility

Power Supply

USB indicator

MCV-10

63*44*24mm

50g

62mA@5V.

Standard USB MIDI device, compliant with USB class, plug and play.

Always on after power on.

Flashes 5 times during factory reset.

Blinks when entering upgrade mode.

Description