bolid S2000-KPB Kullanım Kılavuzu

Kontrol Ünitesi bolid S2000-KPB için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. bolid S2000-KPB 14 sayfaları. Executive module
Ayrıca bolid S2000-KPB için: Kullanım Kılavuzu (17 sayfalar)

Sayfayı Yazdır

1.1 General

1.1.1 This Instruction Manual describes how to operate and maintain the S2000-KPB Executive

Module (hereinafter referred to as the module).

1.1.2 The module is designed to operate as part of fire alarm systems, fixed fire-fighting systems,

access control systems, CCTV in cooperation with an S2000-ASPT Fire Alarm and Extinguishing

Control Panel and an S2000 / S2000M Console or PC.

1.1.3 The module is designed to control executive devices (light panels, sirens, video cameras,

electromagnet locks etc.) as well as clean agent suppression systems and fire-fighting equipment in

gas, dry powder, and aerosol fire-fighting systems.

1.1.4 The module is designed to be installed on a vertical surface inside the protected premises

closely to the executive devices. The module is designed for round-the-clock operation.

1.1.5 The module must not be used in aggressive medium or dust condition, or in .explosion-

hazardous premises.

1.2 Specifications

1.2.1 Power Supply

1.2.2 Power Inputs

1.2.3 Consumed Current (without executive devices):

–

At 12 V power voltage

–

At 24 V power voltage

1.2.4 Consumed Current in Quiescent Mode (all

outputs are switched off):

–

At 12 V power voltage

–

At 24 V power voltage

1.2.5 Outputs:

–

Switching Voltage

–

Switching Current

–

Circuit Failure Monitoring Current

1.2.6 Maximum Total Switched Current of the Module – 3 А

1.2.7 Alarm Loops

1.2.8 Resistance of the alarm loop wires without

additional resistances

1.2.9 Leakage Resistance Between Alarm Loop Wires

or Each Wire and Ground

1.2.10 Overall Dimensions

1.2.11 Weight

1.2.12 Operating Temperatures

S2000-KPB

EXECUTIVE MODULE

Version

INSTRUCTION MANUAL

TECHNICAL DESCRIPTION

2.04

– An external dc power supply with the

power voltage between 10.2 V dc and

28.4 V dc (RIP-12, RIP-24)

– Two

– 130 mA max;

– 70 mA max

– 45 mA max;

– 25 mA max.

– Six

– 10.2 dc to 28.4 V dc

(from the power supply of the module)

– 2 A max

– 1.5 mA max

– Two

– 100 Ohm max

– 50 kOhm min

– 156 mm × 107 mm × 36 mm max

– 0.3 kg max

– Minus 30 to +55°С