Dormakaba TP/TA EASY Safe Montaj Talimatları - Sayfa 12

İç Mekan Mobilyaları Dormakaba TP/TA EASY Safe için çevrimiçi göz atın veya pdf Montaj Talimatları indirin. Dormakaba TP/TA EASY Safe 20 sayfaları.

Sayfayı Yazdır

dormakaba mounting instructions

Note

The insert's screw points depend on the

pivot point (Fig. 25 or Fig. 26).

Fig. 25

65 mm pivot point

Fig. 26

55 mm pivot point

Secure the insert in the door rail according to the

pivot point.

Fig. 27

Securing the insert

8. Screw in the grub screw for fall protection all the

way.

TP/TA EASY Safe

Fig. 28

4.5.5

2. Place and mount the panel at the bottom on the

3. In doing so, hold the glass pane in a slightly

4. Insert the 1st half of the top door rail with the

5. Swivel the glass pane on the half of the door rail

6. Screw the 2nd half of the door rail on so that the

8. Tighten the screws so that the top door rail

5 mm

4.6

12 Nm

2. Unscrew the screws for the top door rail.

3. Align the top door rail so that the clearances

4. Tighten all screws on the front and back with 15

WN 060028 45532

Screwing the grub screw in

Mounting the panel with a top door

rail with top pivot bearing

Note

Mounting must only be carried out by 2

people.

Unscrew the top door rail. The insert clamps in the

half with the bar.

floor bearing/the FDC.

inclined position and secure.

pivot in the bushing in the ceiling.

and hold in position.

door rail can still be moved slightly.

Align the top door rail with a distance of 4.5 mm

(Fig. 19).

clamps firmly on the glass (Fig. 20).

Aligning the panel

Note the panel clearance (Fig. 17).

match and the door rail has an even gap to the

ceiling.

Nm so that the top door rail clamps firmly to the

glass again.

Mounting

2020-11