Daewoo electricals HEA1187 Manuel - Sayfa 3

Isıtıcı Daewoo electricals HEA1187 için çevrimiçi göz atın veya pdf Manuel indirin. Daewoo electricals HEA1187 8 sayfaları. Mini convector heater

before it is cleaned and whilst being repaired.

 Repairs to electrical appliances should only be performed by a qualified

electrician. Improper repairs may place user at serious risk.

 Do not operate this appliance with a damaged plug or cord, after a malfunction

or after being dropped or damaged in any way.

 Regular, periodic checks should be carried out on the mains cable to ensure

no damage is evident. Should there be any signs of damage the appliance

should not be used.

 If the power cable is damaged, it should only be replaced by the manufacturer

or a suitable qualified after-sales-service in order to avoid a hazard

 Do not allow the mains cable to hang over sharp edges or come in contact with

hot surfaces.

 Do not run the mains cable under carpets, rugs, etc.

 Allow the unit to cool before storage.

 Before cleaning, disconnect the appliance from the mains supply and allow to

cool.

 Never place the appliance near to flammable material or high pressure

containers. (e.g., Paper, wood, petrol, solvents, spray canisters etc.)

 This appliance is intended for household use only and should not be used for

industrial purposes.

 Do not use any accessories or attachments with this appliance other than those

supplied or recommended by supplier.

 Do not use this appliance for anything other than its intended use.

 Do not push objects into any openings as damage to the appliance and/or

electric shock may occur.

 Ensure appliance is situated in an open area, do not allow it to come in contact

with Cupboards, Curtains, wall coverings, clothing or other flammable

materials.

 The appliance should not be installed in areas which have a fire-risk, such as

garages, stables or wooden sheds; this is applicable also for rooms in which

highly inflammable gasses or dust can develop. Danger of fire!!

 Even at the lowest setting level the unit is in use. In order to switch off the frost

protector pull out the power plug.

 Unplug after each use. Grasp the plug, not the cord.

During the first few minutes of initial use, you may notice a slight

odour and a little smoke. This is normal and will quickly disappear, It is

the coating applied to the heating elements to prevent any corrosion

during transit.