Dot Origin VTAP50 Kurulum Kılavuzu - Sayfa 10

Kontrol Ünitesi Dot Origin VTAP50 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Dot Origin VTAP50 16 sayfaları. Oem module

3.3 Mounting points

The PCB has 2.7mm diameter mounting holes for fixing the unit. Use 2-4 small nuts and

bolts to mount the board securely.

Figure 3-2 VTAP50 PCB mounting holes - v1 Hardware

The user's smartphone should be able to tap within 10mm of the antenna on the PCB. The

antenna position should be clearly marked and easily accessed, so that users can position

their smartphone appropriately. Be aware that antennas are positioned differently in

different makes of smartphone. Apple iphones often have antennas near the top and

Android phones are more likely to have an antenna in the middle.

VTAP50 OEM MODULE INSTALLATION GUIDE

PAGE 5