Baumer IO-Link RR30 Kullanım Kılavuzu - Sayfa 31

Aksesuarlar Baumer IO-Link RR30 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Baumer IO-Link RR30 40 sayfaları. Radar sensor

Sayfayı Yazdır

4.10 Quality Parameters

4.10.1 Quality Parameters

This parameter indicates the signal strength from the received reflection relative to the set threshold. It is

useful to be monitored by the PLC to detect weak signals which may be caused by misalignment or by dirt

on the sensor surface. By setting the quality threshold to a value above 6 dB an alarm can be generated if

the quality value gets below this number. This might be useful for critical applications to define a minimum

signal strength.

Parameter name

Quality.Value

Quality Bit.Threshold

4.11 Device Access Lock

4.11.1 Device Access Lock

This parameter limits the possibility to erase historical data in the sensor.

Parameter name

Device Access Locks

4.12 Application Specific Profiles

The RR30 IO Link sensor has implemented predefined application profiles. The function allows the user to

get the first entry parameter setting for the chosen application. As not all application are similar this

parameter setting can be a first approach to find the correct settings. In the most application cases the user

has to modify the parameters to the specific application and the environmental conditions.

For the RR30 sensor 8 different profiles are available:

Standard (default setting)

Fill level fluid: slow

Fill level fluid: fast

Fill level solid

Fast detection

Tracking: slow

Tracking: standard

Tracking: fast

When switching between different profiles the modified parameters are stored inside the sensor.

All parameters can be reset by choosing the function "Restore Factory Settings" ( Chapter 4.1)

en_BA_RR30_IO-Link_V0.23.docx

13.01.2021/

Short Description

Quality value indicates the

quality of the reflected signal

Selects the Quality Threshold,

if the quality value is below the

threshold the LEDs start to

blink and the quality bit in the

process data is set to 1

Short Description

Lock the possibility to erase

the collected historical data

31/40

Rights

Unit / Allowed values

units dB

Limits: 6 to 80 dB;

Default: 6 dB

Rights

Unit / Allowed values

false (default) / true

Frauenfeld, Switzerland

Baumer Electric AG