Asus RT-N12B1 Manuel
Kablosuz Yönlendirici Asus RT-N12B1 için çevrimiçi göz atın veya pdf Manuel indirin. Asus RT-N12B1 5 sayfaları.
Sayfayı Yazdır
Contents
•
1 Hardware
♦
1.1 Recovery Mode
♦
1.2 Clear NVRAM
•
♦
♦
♦
♦
♦
3 RT-N12D1 Installation (updated March
•
21 2018)
4 RT-N12HP and RT-N12VP
•
•
•
Hardware
Supported RT-N12 models (and FCC ID):
RT-N12 [A1] (MSQ-RTN12) Broadcom BCM4716
RT-N12B1 (MSQ-RTN12B) Broadcom BCM5357
RT-N12C1 (MSQ-RTN12C) Broadcom BCM5357
CPU Speed
RAM
Flash ROM
Wireless
MIMO
To find the hardware revision, check the device's bottom label or view the top left of the original ASUS
firmware. Do not flash the initial firmware for a different revision of hardware or it may enter an infinite
reboot loop. Recovery mode may be possible to fix it.
Recovery Mode
Hold the recessed reset (Restore) button for 20 sec (or until the power LED blinks slowly) and plug in power.
Using a static IP for the computer, open 192.168.1.1. The router is now in Recovery or Rescue mode.
Clear NVRAM
To clear NVRAM on all models, hold the red WPS button for 20 seconds when applying power. Do NOT
30/30/30.
Contents
Asus_RT-N12
300 MHz
32 MB
4 MB (A1), 8MB (B1, C1)
b/g/n
2x2:2
1