Ampro NEO 300 BEAM Kullanıcı Kılavuzu - Sayfa 6

DJ Ekipmanları Ampro NEO 300 BEAM için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Ampro NEO 300 BEAM 18 sayfaları. Moving head

4. INSTALLATION

A projector can be placed on the stage floor directly or mounted on a truss at any direction without

impacting its performance. Please use a safety cord, which can support 10 times the weight of the projector,

while mounting it on the truss. The safety cord should be used with magazine with a lock. Just as the figures

below, please run the safety cord through the holes at the bottom of the base and around the truss. Use a

safety cord, which can support 10 times the weight of the projector, while mounting it on the truss.

The safety cord should be used with magazine with a lock. Just as the figures below, please run the safety

cord through the holes at the bottom of the base and around the truss.

RIGGING

1. Use M12 bolt to fix the clamp (1) into the omega holder (3), run the bolt through the holder's holes.

2. Push 2 quick-lock fasteners (4) into holes at the bottom of the base, fix them and tighten them clockwise.

3.Run safety cord (2) through holes at the bottom of the base.

1. Clamps.

2. Safety Wire.

3. Omega Holder.

4. Quick-lock fastener.

5. Attachement point.

Use the spanner supplied with a projector to help installation.

WARNING!

THE PROJECTOR MUST BE LIFTED OR CARRIED BY THE HANDLES INSTEAD OF CLAMPS.

FOR SAFETY THE SAFETY CORD SHOULD AFFORD 10 TIMES THE PROJECTOR'S WEIGHT.

P. 6

English Version | NEO 300 BEAM