Amptone Lab XY MIDIpad Kullanıcı Kılavuzu - Sayfa 8
Kayıt Ekipmanları Amptone Lab XY MIDIpad için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Amptone Lab XY MIDIpad 12 sayfaları. Xy midipad midi controller user's manual
Sayfayı Yazdır5. Changing the MIDI channel
User needs to change the channel in order to change the
controlled device. Every channel has different set of
messages assigned. To change the channel, you need to
press the encoder. XY MIDIpad will change the channel
(+1). After reaching the last channel (3), XY MIDIpad goes
back to the first one. On every channel change, red LED
blinks as many times as the number of chosen MIDI
channel (once for Kaoss Pad, twice for Whammy and three
times for synth).
6. Connecting other devices
For a direct connection between XY MIDIpad and the
controlled device, you need to use a MIDI cable (DIN5).
You need to plug one MIDI jack into the XY MIDIpad MIDI
socket (mounted in your guitar) and the other jack to a
controlled device, usually named MIDI IN or MIDI INPUT.
In order to connect more than one device, you need to be
equipped with a MIDI-thru device. It is recommended to
use AmpTone Lab's MIDI thru box (see MIDI Splitter in
Products section at www.amptonelab.com).
8