AMQ KINEX Kullanıcı Kılavuzu - Sayfa 4

İç Mekan Mobilyaları AMQ KINEX için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AMQ KINEX 4 sayfaları.

UPGRADED HANDSET — 4 MEMORY PRESETS

Programming Memory Presets

1. Press the up or down arrow to set the worksurface to the desired height.

2. Press and hold the "M" button until the display blinks. After it starts blinking at the desired height, press

one of the preset number buttons (1, 2, 3 or 4) on the LED screen.

3. The table will automatically reset to this height whenever the preset number is pressed and held until the

preset height is reached.

Power Saving Mode - Waking up the Hand Set

1. Press any button to wake up handset.

Resetting the Base

1. Simultaneously press the up and down arrows for 5 seconds and the desk will begin to go down.

2. Hold the up and down arrow buttons simultaneously until the digital display shows "00" and flashes for 2

seconds.

3. The beeping sound will indicate that the base is reset.

Note:

Please make sure there is nothing under the base before setting to its lowest level.

If the cable is obstructed it will not reset properly.

For questions or support, please contact AMQ Customer Care at

KINEX USER GUIDE | 4

A. Height Adjustment Buttons

B. Memory Position Buttons

C. Memory Setting Button

D. Digital Display

Height Ranges:

2-Stage Legs: 27"-46.7"

3-Stage Legs: 22"-48"

or (877) 801-0370.

amqsolutions.com