Draper D13/5A Talimatlar Kılavuzu - Sayfa 11
Matkap Draper D13/5A için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Draper D13/5A 20 sayfaları. 5 speed bench drill press
Sayfayı Yazdır
ASSEMBLY Cont'd
6. Screw the three downfeed handles
three holes located in the pinion shaft, as
shown in Fig.6.
7. From the loose parts locate the chuck guard
and depth setting rod
screw
. Fig.7.
Q
8. Now slide the chuck guard onto the collar as
shown in Fig.8. Secure by tightening screw
9. Remove nut
Fig.9. from the depth stop.
R
10. Now carefully slide the depth stop rod
Fig.10. through the hole in the head casting
and into the hole
guard. Now secure the depth setting rod by
tightening nut
R
into the
H
. Loosen
P
located in the chuck
T
(Fig.9), as shown in Fig.11.
Fig.6.
O
Fig.7.
O
Fig.8.
.
Q
Fig.9.
R
P
- 11 -
Q
Q
R
H
P
Fig.10.
P
T
Fig.11.