Draper 20922 Talimatlar Kılavuzu - Sayfa 16

Öğütücü Draper 20922 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Draper 20922 20 sayfaları. 820w 230v 115mm angle grinder

SETTING THE GRINDER

9.3 GRINDING - FIG. 6

When performing grinding operations maintain

an angle of approximately 30° between the

work surface and the disc face.

Only use abrasives specifically designed for

this task.

9.4 CUTTING - FIG. 7

IMPORTANT

LEGAL

NOTICE

Cutting operations should only be attempted

with the "cutting" guard fitted to this grinder.

(Draper Stock No.41430.)

Please contact Draper Tools for further

information on how to purchase this optional

accessory.

This guard must be fitted for your safety.

When performing cutting-off operations do not

incline the machine as this can lead to the

abrasive wheel becoming jammed, damaged or

excessively and abnormally worn.

Only use abrasives specifically designed for

this task.

WARNING: As the cutting-off/grinding wheel

wears during use, its diameter reduces. This

reduces the peripheral speed and the cutting

efficiency. This results in increased load on the

grinding machine which if continued will

damage the motor. Ensure that the diameter of

the wheel is within 25% of its original size.

IMPORTANT: Excessive pressure on the machine

does not result in a higher abrasive efficiency.

Excessive pressure increases wear and tear on

the accessory and will damage the grinder which

is not covered under the guarantee.

FIG. 6

FIG. 7