Draper 70300 Kullanıcı Kılavuzu - Sayfa 16

Öğütücü Draper 70300 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Draper 70300 20 sayfaları. Angle grinder/cut-off tool

Sayfayı Yazdır

OPERATION

9.1 ON/OFF SWITCH – FIG. 5

To start the angle grinder/cut-off tool, push the

on/off button (1) forward.

To lock the on/off switch, press the switch down

at the front until it latches.

To switch off the power tool, release the on/off

switch or, if it is locked, briefly push down the

back of the switch and then release it.

Warning!

Do not set the machine down until the spindle

has completely stopped.

Note: During use, keep clothing out of the line

of any sparks formed. Sparks from metal

grinding can set fire to many types of clothing

in a short time. The risk is less if your outer

clothing is made of wool, or flame retardant

treated cotton.

Dust : A correctly fitted dust mask, suitable for

the activity and in accordance to the relevant

standard, must be worn.

9.2 GRINDING – FIG. 6

When performing grinding operations maintain

an angle of approximately 30° between the

work surface and the disc face.

Only use abrasives specifically designed for

this task.

9.3 CUTTING

Important legal information:

Cutting operations should only be attempted in

conjunction with the guard fitted to this grinder.

This guard must be fitted for your safety.

When performing cutting-off operations do not

incline the machine as this can lead to the

abrasive wheel becoming jammed, damaged or

excessively and abnormally worn.

Only use abrasives specifically designed for

this task.

(1)

FIG. 5

LOCK ON

FIG. 6

Warning!

As the abrasive wheel wears during use,

its diameter reduces. This reduces the

peripheral speed and the machine's

efficiency. This results in increased load on

the grinding machine which if continued

will damage the motor. Ensure that the

diameter of the wheel is within 25% of its

original size.

Important: Excessive pressure on the

machine does not result in a higher

abrasive efficiency. Excessive pressure

increases wear and tear on the accessory

and will damage the angle grinder which is

not covered under the guarantee.

– 16 –

OFF