Drawell ZNHW-500ML Kullanıcı Kılavuzu - Sayfa 4

Laboratuvar Ekipmanları Drawell ZNHW-500ML için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Drawell ZNHW-500ML 10 sayfaları.

II. Features

1. This apparatus uses the vertical structure modeling and makes full use of spatial

arrangement for the rotation, evaporation, condensation, collection units, and thus covering

little floor space.

2. The sealing element of this apparatus uses PTFE, which is corrosion-resistant and easy

for cleaning.

3. The condensation pipe adopts double-effect (through cold trap and snake type)

condensation method to ensure high recovery rate. Ball-milling mouth is connected,

assembled and unassembled easily. Feeding and discharge valves can realize continuous

adding of fluid and fast discharge.

4. Evaporation bottle (flask) is connected with the principal machine through the nut for

easy installation and uninstallation.

5. Thermostat adopts the touchable smart digital display, which can accurately set the

heating temperature.

6. Frequency control is available for the adjustment of rotation speed, with stable and

reliable digital display.

7. Water bath kettle can be moved up and down. The XD-5000-type kettle adopts the

method of single hand wheel lift, and XD-5000 adopts two ways, namely through power and

hand wheel.

III. Matters needing attention for use

1. Users should read the Manual first before use.

2. The power voltage must be in line with the specification stipulated in the Manual for this

product.

3. As for the expensive solution, a simulation technology experiment should be conducted

first. Then, the solution can be normally used after confirming the equipment can meet the

experimental requirements.

4. Any repair or inspection of the machine must be carried out5 minutes after cutting off the

power.