Bosch WLT Series Kullanım Kılavuzu ve Kurulum Talimatları - Sayfa 29
Yıkayıcı Bosch WLT Series için çevrimiçi göz atın veya pdf Kullanım Kılavuzu ve Kurulum Talimatları indirin. Bosch WLT Series 40 sayfaları.
Sayfayı Yazdır
the è symbol disappears, and
■
adding is possible.
the è symbol lights up, it is not
■
possible to add laundry.
To continue the program, press the
button A.The program continues
automatically.
Notes
Do not leave the door open for too
■
long when adding laundry as water
from the laundry may leak out.
For safety reasons, the door remains
■
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add laundry during this time.
The load display is not active during
■
reloading.
Changing the programme
Press the A button.
1.
Select another program.
2.
Press the A button.The new
3.
program starts from the beginning.
Cancel the programme
For programmes at high temperatures:
Press the A button.
1.
To cool down laundry: Select
2.
' Rinse.
Press the A button.
3.
For programmes at low temperatures:
Press the A button.
1.
Select 0 Spin/[ Drain/Empty (if
2.
only a drain cycle is required, set
rpm (spin speed) to - 0 - )
Press the A button.
3.
Programme end during rinse
hold
- - - - 0appears in the display panel and
the indicator lamp of the A button
flashes.
Continue the programme by selecting
the Abutton or a spin speed.
Operating the appliance
End the program by setting the program
selector to 0 Spin/[ Drain/Empty (if
only a drain cycle is required, set rpm
(spin speed) to - 0 - ) and then select
the A button.
Programme end
End appears in the display panel and
the indicator lamp of the A button is
off.
Removing laundry/switching
off the appliance
Open the loading door and remove
1.
the laundry.
Turn the programme selector to Off.
2.
The appliance is switched off.
Turn off the tap.
3.
Not required for AquaStop
Note:
models.
Notes
Do not leave any items of laundry in
■
the drum. They may shrink in the
next wash or discolour another item.
Remove any foreign objects from the
■
drum and the rubber gasket – risk of
rusting.
Wipe the rubber gasket dry.
■
Leave the loading door and
■
detergent drawer open so that any
remaining water can evaporate.
Always wait until the programme
■
ends as the appliance could still be
locked. Then switch the appliance
on and wait for it to unlock.
en
29