Drawmer 1970 Operatör El Kitabı - Sayfa 3

Kayıt Ekipmanları Drawmer 1970 için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Drawmer 1970 12 sayfaları. Dual fet compressor & pre-amplifier

Sayfayı Yazdır

DUAL FET COMPRESSOR & PRE-AMPLIFIER

The 1970 Dual F.E.T. Compressor and Pre-Amplifier builds

on a heritage inspired by the first pro audio "tool box"

compressor, the illustrious Drawmer 1960, but with a

greatly expanded feature set, making it one of the most

adaptable mic preamplifier/compressors on the market

today. Bringing vintage audio characteristics at an

affordable price.

Whilst the feature set of the 1970 is similar to the Drawmer

1960, and the layout of the controls will add to the

comparisons, the 1970 has been greatly improved and

the DI EQ has been fine tuned to be more accurate than

its stable-mate, with various enhancements.

The 1970 use the latest THAT Corporation technology in

the 2 mic preamps to provide ultra clean, transparent and

precise recordings that can be processed at a later stage

using your favourite warming method, be it saturation, valve,

transformer or tape. In addition each channel is capable

of 66dB of gain, with switchable mic impedance for

accurate mic matching to bring out the best from any

microphone used. Phase reverse is also included.

From tracking instruments via the dedicated D.I. input, to

recording vocals via the ultra clean mic pre's, recording a

guitar cabinet with two microphones, or a singer playing

guitar, or even stereo buss compression using the

comprehensive linking and mix facilities, the 1970 is the

perfect versatile tool for any studio or live event.

DRAWMER

INTRODUCTION

•

DRAWMER 1970 O

PERATOR'S

Two THAT Corporation ultra clean mic pre's with 66dB

of gain with phantom power and switchable mic

impedance for accurate mic matching

Separate Line & Mic input XLR's

1 pro quality instrument DI input with low and high EQ.

Can be used as 2 mono tracking compressors or 1

stereo buss compressor (avoiding image shifting) via

the class leading comprehensive linking facilities.

FETs can be bypassed altogether to provide ultra clean

outputs.

Standard controls such as Threshold, Ratio, Attack &

Release, with 8 LED GR Metering on each band.

Rear panel Side-chain insert points provide even further

control.

'Big' and 'Air' Modes Help to preserve the very deep

lows and Enhance the sparkling highs.

Variable Wet/Dry Mix plus Output Gain knobs on both

channels give a 'Parallel Compression' function without

the need for external mixing devices, providing complete

and effortless control over the amount of compression

used and output levels.

Two backlit Analogue V.U. Meters with Switchable

+10dB Rescale Mode. Time delay relays on outputs

for clean power up/down.

Internal Low Hum Toroidal Linear Power Supply with

Voltage Selector Switch.

Classic Drawmer build quality with rugged steel

chassis and aluminium front panel.

Designed and Handmade by Drawmer in the UK.

ANUAL

CHAPTER 1