Bosch FAP-OC 500Series Kullanıcı Kılavuzu - Sayfa 10

Fırın Bosch FAP-OC 500Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Bosch FAP-OC 500Series 48 sayfaları. Built-in wall ovens
Ayrıca Bosch FAP-OC 500Series için: Kurulum Talimatları Kılavuzu (21 sayfalar), Kullanım Kılavuzu (40 sayfalar), Kurulum Kılavuzu (6 sayfalar), Ürün Bilgileri (40 sayfalar), Kurulum Kılavuzu (28 sayfalar), Kullanıcı Kılavuzu (48 sayfalar), Kurulum Kılavuzu (28 sayfalar), Kullanım ve Bakım Kılavuzu (44 sayfalar), Kurulum Kılavuzu (32 sayfalar), Kullanım ve Bakım Kılavuzu / Kurulum Talimatları (40 sayfalar), Hızlı Referans Kılavuzu (4 sayfalar), Kullanım ve Bakım Kılavuzu (27 sayfalar), Kurulum Kılavuzu (24 sayfalar), Kurulum Kılavuzu (32 sayfalar), Kullanım ve Bakım Kılavuzu (24 sayfalar), Kurulum Kılavuzu (28 sayfalar), Servis Kılavuzu (41 sayfalar), Kullanım ve Bakım Kılavuzu (21 sayfalar), Kurulum Kılavuzu (32 sayfalar), Servis Kılavuzu (36 sayfalar), Kurulum Kılavuzu (32 sayfalar), Hızlı Başlangıç ve Güvenlik Kılavuzu (13 sayfalar)

Sayfayı Yazdır
Bosch FAP-OC 500Series Kullanıcı Kılavuzu
en-us Familiarizing yourself with your appliance
5 Familiarizing yourself with your ap-

Familiarizing yourself with your appliance

pliance
Familiarizing yourself with your appliance
5.1 Control panel
Touch keys
Touch keys are touch sensitive areas. Touch a symbol to
activate the corresponding function.
Touch key
Function
On/Off
Main switch
⁠
⁠
⁠
...
Settings area
Select cooking zone
Panel Lock
Wipe protection / Panel lock
Speed Boost 
SpeedBoost® function
Timer
Kitchen timer
Notes
¡ Keep the controls clean and dry. Moisture can impair
the function of the controls.
¡ Do not place cookware close to the displays and sen-
sors. The electronics may overheat.
Displays
The displays show active settings and functions.
Display
Name
Cooktop ready
5.3 Cooking zones
Here you can find an overview of the cooking zones avail-
able on your cooktop. Place the cookware on the cooking
zone that best matches its size.
When a cooking zone is active, the corresponding displays
light up.
Symbol Cooking zone
Single cooking zone
Triple cooking zone
10
You can use the control panel to configure all functions of
your appliance and to obtain information about the operat-
ing status.
The control panel image is representative. Your appliance
may vary slightly.
Display
Name
-
Power levels
/

Residual heat indicator

⁠
Indicated function active
⁠
Cooking zone selected
SpeedBoost® function active
Timer value
⁠
Timer indicator
5.2 Residual heat indicator
The cooktop is equipped with a residual heat indicator for
each cooking zone. The residual heat indicator lights up
when a cooking zone is turned off. Do not touch the cook-
ing zone when the residual heat indicator lights up.
Display
Meaning
The cooking zone is hot.
The cooking zone is warm.
If you remove the cookware from the cooking zone during
cooking, the residual heat indicator and the selected
power level flash alternately.
Only use cookware that is suitable for induction cooking.
→  "Induction cooking", Page 8
Function
Only one cooking zone size is available.
This cooking zone can have three different sizes. When you place
cookware on the cooking zone, the part of the cooking zone that is
fully covered by the cookware is turned on automatically. The size
can be single, dual or triple.