Alen AMS12 12000 BTU AND 13.5 SEER Kurulum Kılavuzu - Sayfa 12

Klima Alen AMS12 12000 BTU AND 13.5 SEER için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Alen AMS12 12000 BTU AND 13.5 SEER 17 sayfaları. Split type room air conditioner 9000 btu and 14.5 seer/12000 btu and 13.5 seer

Sayfayı Yazdır

CONDENSOR INSTALLATION (OUTDOOR)

1) Condensor (Outdoor) Unit Installation Precaution

Install the outdoor unit on a rigid base to prevent increasing noise level and

vibration. Determine the air outlet direction where the discharged air is not

blocked.

In the case that the installation place is exposed to strong wind place the

unit lengthwise along the wall or use dust or shield plates.

If need suspended installation, the installation bracket should accord with

technique requirement in the installation bracket diagram. The connection

between bracket and wall, bracket and the air conditioner should be firm,

stable and reliable.

Be sure there is no obstacle which blocks the air flow.

Install the unit on a flat, level surface where is can be fastened securely.

2) Drain Elbow Installation

Seal

Drain Elbow

Fit the seal into the drain elbow, then insert

the drain elbow into the base pan hole of the

condensor (outdoor) unit, rotate 90

Base pan hole of

assemble. Connect the drain elbow with an

condensor

(outdoor) unit

extension drain hose (locally purchased), in case

Seal

the water drains off the condensor (outdoor) unit

during the heating mode. (heating models only).

Drain Pipe

Strong wind

to securely