Alen C425 Kullanıcı El Kitabı - Sayfa 11

Klima Alen C425 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Alen C425 14 sayfaları. Alen c425: user guide

Sayfayı Yazdır

A) TEMPORARY-

1. Attach one end of the duct to the exhaust air outlet of the

mobile air condition, push it downwards, be sure to fix

thoroughly. (See Fig.9)

2. Attach the other end of the duct to adaptor B.

3. Put the end of duct to a nearby window.

B) PERMANENT-

1. Attach one end of the duct to the exhaust air outlet of the

mobile air conditioner. According to the arrow direction,

push it downwards, be sure to fix thoroughly. (See Fig.9)

2. Install the adaptor A onto the wall by using 4 expansion

plugs and screws, be sure to fix thoroughly. (See Fig.10)

3. Attach the other end of the duct to adaptor A.

4. Cover the hole using the adaptor cap when not in use.

The duct can be compressed or extended between 20inches

and 78inches, but it is desirable to keep the duct length to a

minimum.

IMPORTANT:

DO NOT OVER BEND THE DUCT (SEE Fig.11)

4. WATER TANK SAFETY FEATURE

This unit is equipped with a water tank which

is fastened with a band to protect the water

level switch in transportation. Prior to the

first usage, remove the water tank from the

air conditioner and remove this band (see

figure 13). Return the water tank to it's original

position in the air conditioner.

When the water level reaches a pre-determined

level within the tank, the digital display will show

"P1" and the water full indicator light will flash(red).

Carefully remove the water tank from the cabinet

and dispose of the water (see figure 14). Replace

the water tank back to its original position. The red

light will stop flashing and the "P1" will stop being

displayed.

Note: When you remove the water tank, please

do so slowly and gently to prevent from spilling

the condensed water.

Expansion plug

position

Adapter A

Fig.10

Fig.11

Fig.12

Fig.13

max 120CM

min 30CM