Dream Catcher ME1310 Manuel - Sayfa 6
Anten Dream Catcher ME1310 için çevrimiçi göz atın veya pdf Manuel indirin. Dream Catcher ME1310 18 sayfaları. Antenna and propagation (3d) lab 1 introduction to 3d radiation pattern measurement
Sayfayı Yazdır4. Mount the other 2400 MHz dipole antenna (AUT) on the top connector of the rotatable antenna
holder on the receiver module (Rx). This is the receiving antenna.
5. Adjust the RX pole's horizontal distance, make sure the pcb antenna is align to the RX pole.
6. Orientate the receiving antenna broadside to the transmitting antenna as shown in Figure for
vertical polarization and maximum reception.
Tx
Figure 4 – Orientation of receiving and transmitting antennas for vertical polarization
ME1310 Antenna and
Propagation (3D)
Figure 3 – RX Module
50 cm
http://dreamcatcher.asia/cw
AUT
(Rx)
Lab 1 - 6/18