Anchor AF-4003 Kurulum Talimatları Kılavuzu - Sayfa 8
Su Filtrasyon Sistemleri Anchor AF-4003 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Anchor AF-4003 10 sayfaları. Under counter water filter system
Ayrıca Anchor AF-4003 için: Hızlı Kurulum Kılavuzu (9 sayfalar), Hızlı Kurulum Kılavuzu (9 sayfalar)
Sayfayı Yazdır
Mounting the Faucet
Your unit comes complete with a long reach faucet.
NOTE: Air gap option installation instructions are available upon request. The following
instructions is for non-air gap option.
1) Slide chrome cover plate and rubber gasket onto stem of faucet and place faucet onto sink with the
stem going through the hole.
2) Place metal washer and lock washer over threaded stem of faucet and tighten nut from under the
counter surface to lock the faucet into place. DO NOT OVER TIGHTEN.
3) Connect the blue tube to the faucet stem under the counter and tighten. NOTE: Use a brass insert and
plastic ferrule when connecting the blue tube to the faucet (Fig.4)
POSITIONING THE SYSTEM
1.
The head assembly will stand up in the sink cabinet or can be hung on screws provided.
CONNECTING THE SYSTEM
1) Compression fittings may be found on the water supply adapter and the faucet. To
make the connections, slide a compression nut onto the tubing (Fig. #8), slip a white
plastic sleeve onto the tubing with the beveled end towards the end of the tubing,
insert a brass insert into the tubing, bottom the tubing into the fitting, slide the nut up
and tighten with a wrench. DO NOT OVER TIGHTEN
NOTE: Do not use brass sleeves on plastic tubing, use only plastic sleeves on plastic tubing.
1.
Use the color coded tubing to make the following connections:
A.
The
assembly
B.
The b l u e tubing connects the faucet to the outlet side of the post carbon.
Figure # 8
white tubing
connects the water supply adapter to the first clear housing of the head
8 |
P a g e