Anchor AF-4003 Інструкція з монтажу Посібник з монтажу - Сторінка 8

Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Системи фільтрації води Anchor AF-4003. Anchor AF-4003 10 сторінок. Under counter water filter system
Також для Anchor AF-4003: Посібник з швидкого налаштування (9 сторінок), Посібник з швидкого налаштування (9 сторінок)

Mounting the Faucet

Your unit comes complete with a long reach faucet.

NOTE: Air gap option installation instructions are available upon request. The following

instructions is for non-air gap option.

1) Slide chrome cover plate and rubber gasket onto stem of faucet and place faucet onto sink with the

stem going through the hole.

2) Place metal washer and lock washer over threaded stem of faucet and tighten nut from under the

counter surface to lock the faucet into place. DO NOT OVER TIGHTEN.

3) Connect the blue tube to the faucet stem under the counter and tighten. NOTE: Use a brass insert and

plastic ferrule when connecting the blue tube to the faucet (Fig.4)

POSITIONING THE SYSTEM

The head assembly will stand up in the sink cabinet or can be hung on screws provided.

CONNECTING THE SYSTEM

1) Compression fittings may be found on the water supply adapter and the faucet. To

make the connections, slide a compression nut onto the tubing (Fig. #8), slip a white

plastic sleeve onto the tubing with the beveled end towards the end of the tubing,

insert a brass insert into the tubing, bottom the tubing into the fitting, slide the nut up

and tighten with a wrench. DO NOT OVER TIGHTEN

NOTE: Do not use brass sleeves on plastic tubing, use only plastic sleeves on plastic tubing.

Use the color coded tubing to make the following connections:

The

assembly

The b l u e tubing connects the faucet to the outlet side of the post carbon.

Figure # 8

white tubing

connects the water supply adapter to the first clear housing of the head

8 |

P a g e