CarlStahl SL000161 Kullanım Kılavuzu - Sayfa 3

Kablolar ve konektörler CarlStahl SL000161 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. CarlStahl SL000161 10 sayfaları. Cable gripper

2 Safety Instructions and fields of application

➢ The cable holders, fasteners and attachments may be used in a temperature range of -20

➢ The cable holders are allowed only in the interior zone. (Home, public / object area)

➢ Our cable holders, fasteners and attachments may not be used in an outdoor area.

➢ Storage may only be carried out in closed and dry rooms.

➢ During storage, protection against unauthorized use by third parties must be ensured.

➢ The use on or in locations with high corrosion potential, such as in swimming pools

➢ If you have any questions about the surrounding, please contact our Carl Stahl

➢ The maximum working loads given in the tables are to be

➢ !! IMPORTANT: pay attention to the tables with working loads

➢ Impact forces during the installation are not to exceed the permitted maximum

➢ Once overloaded, a wire rope holder incl. fastener and attachments must not be used and

➢ The cable holders incl. fasteners and attachments are only approved for receiving static

➢ The fixing of cable holders to pieces of furniture can adversely affect the stability.

➢ For the connection to ceilings or walls, solely suitable dowel or screws are to be used.

➢ A durable upper material is a prerequisite. The weight-bearing material is to be

➢ When drilling holes in the upper material, particular attention must be paid to the course

➢ When mounting the cable holders incl. fasteners and attachment parts, all provided fixing

185_05042023

Carl Stahl Technocables GmbH

Tobelstr. 2

D - 73079 Süßen

Germany

°C to +50 °C.

(chlorine-containing substances) or seawater (substances with high salinity) is not

permitted.

Technocables team.

followed. Higher working loads are not permitted.

for the different wire rope holder series !!!

workloads.

must be exchanged.

loads.

The fasteners that are to be used must fit to the weight-bearing upper material. For

this purpose, observe the instructions of the fastener manufacturer.

checked before the installation for sufficient load-carrying capacity. When using

fasteners, the relevant instructions and the assembly instructions of the fastener

manufacturer must be observed.

of electrical cables, as well as the course of gas and water pipes.

screws must be used.

Contact

Phone: (+49) (0)7162/9443 - 0

http://www.carlstahl-technocables.de/

05042023

Seite 3 von 10