CarlStahl SL000161 Kullanım Kılavuzu - Sayfa 4

Kablolar ve konektörler CarlStahl SL000161 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. CarlStahl SL000161 10 sayfaları. Cable gripper

Sayfayı Yazdır
EN
DE
➢ The maximum exit angle of the wire rope must not exceed a max. of
➢ Cable holders must always be used in pairs to prevent rotation of the
➢ If a cable holder with safety nut is used, it must be tightened as far as
➢ Depending on the product, existing safety flaps must be securely closed.
➢ Depending on the product, existing fixing screws must be tightened
➢ For the safe operation of the cable holders, a minimum rope overhang of 20 mm is
➢ The recommended minimum rope overhang of 20 mm during the assembly is to be
➢ Particular attention should be paid to these measures in cable holders without side exit, in
➢ All fasteners and attachments must be secured against unintentional loosening in
For all items that are not listed in this manual, or that are unclear, it is essential to consult the
185_05042023
All rights reserved:
Carl Stahl Technocables GmbH
Tobelstr. 2
D - 73079 Süßen
Germany
5 degrees with respect to the axis of the cable holder (see adjacent
diagram).
suspended object.
possible by hand after the object has been suspended.
securely.
absolutely recommended.
guaranteed by suitable measures. For example, marks on the rope before introducing in
the cable holder, opening the components to be taken down or visibility of the roping
during the assembly.
which the exiting rope end is not readily visible.
the further processing, by appropriate measures
manufacturer BEFORE using the product.
Contact
Phone: (+49) (0)7162/9443 - 0
http://www.carlstahl-technocables.de/
05042023
Seite 4 von 10