Carmanah F Series Kullanıcı Kılavuzu - Sayfa 9

Solar panel Carmanah F Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Carmanah F Series 18 sayfaları. Rrfb mast arm kit
Ayrıca Carmanah F Series için: Hızlı Başlangıç Kılavuzu (20 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (16 sayfalar), Enerji Yönetim Sistemi Değiştirme Kılavuzu (12 sayfalar), Kurulum Kılavuzu (20 sayfalar), Değiştirme Kılavuzu (9 sayfalar), Kurulum Kılavuzu (18 sayfalar)

Carmanah F Series Kullanıcı Kılavuzu
4.6

Connect and Configure Radar Module

Plug the radar cable connector onto its mate on the Radar Detection PCBA within the Carmanah E, F or G
system. Turn the barrel firmly clockwise to lock the connectors together.
The radar module is configured from the factory to trigger an activation whenever an oncoming
vehicle is detected approaching at a speed of at least 5 mph (8 km/h).
Changes from the default settings are often unnecessary. Reasons for changing the radar's configuration include:
To change the duration the LEDs flash following the last vehicle activation
To change the detection speed limits (the minimum and maximum speeds that will trigger an activation)
To increase or decrease the sensitivity of the radar module
You've ordered the Advanced Statistics option and wish to configure data logging options or read traffic
statistics from the radar module
To configure the radar module for a less common application (e.g., a radar-activated minimum speed
sign)
If it is necessary to configure the radar module, see
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
Section 6.0 Radar Module Connection &
RADAR DETECTION KIT
Settings.
|
carmanah.com
9