Atid ATD100N Kullanıcı Kılavuzu - Sayfa 9

RFID Sistemleri Atid ATD100N için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Atid ATD100N 12 sayfaları.

Sayfayı Yazdır

3. HID (Human Interface Devices) mode

When the ATD100N is set to HID mode, the device transmits the collected EPC data to the host in HEX
format. In this case, open a program that can create documents (txt, docx, xlsx, etc.) and place the
cursor on the program to display the collected data.

4. Product operation in HID mode

1)
When the USB cable of the product is connected to the Windows Host device, the product turns
on with a buzzer sound.
2)
When booting is normally completed, 'Status LED 1' turns green and 'Status LED 2' blinks in red.
When connected to Host, 'Status LED 2' stops blinking and stays on.
3) When connected to the host, data collection starts automatically.
4) When data collection starts, status LED 1 blinks in orange depending on whether there is data or
not.
5) Data collected in HID mode is transmitted only EPC excluding CRC and PC to the host device.
Terminator is set to line breaks.
6) Press and hold the power switch or disconnect the USB cable from the host device to turn off the
product.
ATD100N User Guide
9