Community Distributed Design DS8SUB Kurulum ve Kullanım Kılavuzu - Sayfa 6
Konuşmacılar Community Distributed Design DS8SUB için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Kılavuzu indirin. Community Distributed Design DS8SUB 12 sayfaları. Distributed design series surface mount loudspeakers
Ayrıca Community Distributed Design DS8SUB için: Kurulum ve Çalıştırma Bakım Kullanıcı El Kitabı (12 sayfalar)
Sayfayı Yazdır
Infin-A-Ball™ Mounting System
Community's Infin-A-Ball™ (IAB) mounting
system allows low-profile mounting and precise
aiming over a broad tilt–swivel range. The IAB
ball-mount receptacle is factory pre-attached to
a recess in the cabinet, and after placing the
loudspeaker onto the IAB bracket, you need
only to twist the included hex wrench to lock any
position. The IAB bracket has factory-installed
internal wiring with an internal 4-pole Euroblock
connector in its base (for neat loop-through
connections) and a 2-pole male Euroblock plug
near the ball end for connection to the cabinet.
An IP56 wiring cover is also pre-installed,
providing snap-on weather-resistant protection.
Actual clamping screw
pressed against ball end
of IAB bracket.
Distributed Design Series
Surface Mount Loudspeakers
Loosen clamp using provided hex wrench,
rotate loudspeaker cabinet to desired position,
Installation and Operation Manual
then tighten clamp to lock
Page 6