CARNES HXHAST Kullanıcı El Kitabı - Sayfa 10
Nemölçerler CARNES HXHAST için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. CARNES HXHAST 20 sayfaları. Commercial humidistat
Sayfayı Yazdırinstallation
outdoor air intake duct installation
Mount the sensor in an outdoor air intake by drilling a ¼ inch hole within 8
inches of outside. Angle the hole towards the outside. Insert the temperature
sensor into the intake pipe until the sensor is at least 2 inches outside the
structure in the intake pipe. Seal the hole and secure the wire so it cannot
be accidentally pulled out.
Drill Hole in
Pipe & Seal
Connect to
Humidistat
(ODT)
Figure 4: Outdoor Temperature Sensor in Furnace Intake Pipe
10
|
CommerCial humidiStat
INSIDE
OUTSIDE
Furnace
Fresh Air
Intake
OAT (Outdoor
Air Temperature)
Sensor
2" min.
Form 16767