Anderson Oper-SRB Kullanım Kılavuzu - Sayfa 8

Brülör Anderson Oper-SRB için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Anderson Oper-SRB 12 sayfaları.

When the burner runs in direct firing application, the max working temperature will be

the process temperature.

When the burner runs at indirect firing application, the max working temperature will

be the preheated combustion air temperature.

To ensure the burner working performance, the heat flux from radiant tube surface must

be considered. Below chart shall be checked for heat flux calculation.

5. Burner maintenance

The burner should be inspected regularly. This is especially important after a prolonged

period of shut-down.

5.1 Inspection of the nozzles

During the first month of operation of the burner, inspection of the nozzle must be carried

out every week. During the second month, the period between inspections can be

extended to two weeks. Anderson recommends that each nozzle is inspected at least once

every month. Every time to check the burner, it should be pull out from furnace.

Anderson Thermal Soluions（Suzhou）Co. Ltd.

Anderson Thermal Solutions – ANM75 Burner Operation Manual

Chart 1 Radiant heat flux vs. furnace temperature

Metal

Radiant tube surface heat flux / kW·m

Ceramic

-2