DREAMVISION T9006000 Montaj ve Kalibrasyon - Sayfa 11

Projektör DREAMVISION T9006000 için çevrimiçi göz atın veya pdf Montaj ve Kalibrasyon indirin. DREAMVISION T9006000 16 sayfaları. Theatre system kit for inti

Sayfayı Yazdır

3.3 Conﬁgure the Picture Gemoetry for 16:9 Sources

When selecting an input with a 16:9 aspect ratio frame, the anamorphic lens has to be disengaged to obtain a non-

distorded image on the screen.

Sel OFF the Anamorphic Mode function:

When a 16:9 source is input, set OFF the Anamorphic Mode to disengage the anamorphic lens from the light beam:

"Menu ⇒ ⇒ ⇒ ⇒ Installation ⇒ ⇒ ⇒ ⇒ Anamorphic Mode ⇒ ⇒ ⇒ ⇒ OFF"

•

3.4 Switching between Formats

To switch forth and backward, press twice the [ASPECT] button on the RCU as described below.

Appearance

on 2.35 screen

16:9 on 2.35 screen

2.35 on 2.35 screen

When the source automatically switches format...

... Browse into the menu and change V-Stretch value from RCU.

3.5 Switching between Formats with RS-232 or programmable RCU

Communication Speciﬁcations

Control of this unit is possible using a computer or automation device connected with a RS-232 cross cable (female

- female D-sub 9 pins cable). Communication speciﬁcations for this unit are as follows:

Baud Rate

Data Format

Mode

Character Length

Parity

Start Bit

Stop Bit

R699802 - THEATER System Kit for Inti

16:9 image displayed into a 2.35:1 screen

Anamorphic Mode: OFF

19200 bps

Binary

Non-Synchronous

8 bits

None

1 bit set to high

1 bit set to low

3.0 PROJECTOR-SIDE CONFIGURATION

16:9 format

2.35:1 format

Anamorphic Mode A