DREAMVISION T9006000 조립 및 보정 - 페이지 11

{카테고리_이름} DREAMVISION T9006000에 대한 조립 및 보정을 온라인으로 검색하거나 PDF를 다운로드하세요. DREAMVISION T9006000 16 페이지. Theatre system kit for inti

3.3 Conﬁgure the Picture Gemoetry for 16:9 Sources

When selecting an input with a 16:9 aspect ratio frame, the anamorphic lens has to be disengaged to obtain a non-

distorded image on the screen.

Sel OFF the Anamorphic Mode function:

When a 16:9 source is input, set OFF the Anamorphic Mode to disengage the anamorphic lens from the light beam:

"Menu ⇒ ⇒ ⇒ ⇒ Installation ⇒ ⇒ ⇒ ⇒ Anamorphic Mode ⇒ ⇒ ⇒ ⇒ OFF"

•

To switch forth and backward, press twice the [ASPECT] button on the RCU as described below.

Appearance

on 2.35 screen

16:9 on 2.35 screen

2.35 on 2.35 screen

When the source automatically switches format...

... Browse into the menu and change V-Stretch value from RCU.

Communication Speciﬁcations

Control of this unit is possible using a computer or automation device connected with a RS-232 cross cable (female

- female D-sub 9 pins cable). Communication speciﬁcations for this unit are as follows:

Baud Rate

Data Format

Mode

Character Length

Parity

Start Bit

Stop Bit

R699802 - THEATER System Kit for Inti

16:9 image displayed into a 2.35:1 screen

Anamorphic Mode: OFF

19200 bps

Binary

Non-Synchronous

8 bits

None

1 bit set to high

1 bit set to low

3.0 PROJECTOR-SIDE CONFIGURATION

16:9 format

2.35:1 format

Anamorphic Mode A