Atlanta BYK 5415 Manuel - Sayfa 13

Ölçüm Cihazları Atlanta BYK 5415 için çevrimiçi göz atın veya pdf Manuel indirin. Atlanta BYK 5415 20 sayfaları.

13. Continue testing or switch off the

instrument as required. Unplug the power

supply if the instrument is not to be used for

long periods.

Operation Notes:

The instrument will accommodate panels

with a maximum width of 100mm.

Reference to the test method recommends

the use of burnished steel panels with a

width and length of at least 70 mm and

a thickness range of 0.3mm to 1.25mm

(maximum).

Do not exceed the above ﬁ gures as this may

cause permanent damage to the instrument.

Zero

All measurements are taken from the

zero position (where the indenter is level

with the base of the clamp area). It is not

necessary to re-zero the zero position when

power is switched off and on. However,

large ambient temperature changes will

affect the readings to a small extent, and

it is good practice to regularly re-zero the

instrument.

Power Off

Turn off the power using the switch on the

back panel. The zero position will be stored

during power off.

Operation