Electrolux Icon E36WC45FSS Kullanım ve Bakım Kılavuzu Kurulum Talimatları - Sayfa 9
Havalandırma Davlumbazı Electrolux Icon E36WC45FSS için çevrimiçi göz atın veya pdf Kullanım ve Bakım Kılavuzu Kurulum Talimatları indirin. Electrolux Icon E36WC45FSS 24 sayfaları. Electrolux e36wc45fss range hood: supplementary guide
Ayrıca Electrolux Icon E36WC45FSS için: Şartname Sayfası (2 sayfalar), Fabrika Parça Kataloğu (4 sayfalar), Kullanım ve Bakım Kılavuzu (24 sayfalar)
Sayfayı Yazdır
Getting Started
OPERATING YOUR HOOD
IMPORTANT
Do not operate the vent system without the filters in place or with dirty, grease-laden filters.
Controls
The hood is operated using the (5) push-buttons located at eye-level, on the front
edge of the hood.
The light switch turns the halogen lights on and off. Push the light switch once to
turn the lights ON - push a second time to turn the lights ON to a brighter level
- push a third time to turn the lights OFF.
The blower on-off / speed 1 switch turns the blower on to its
lowest running speed. To turn OFF the blower, push in and
hold this blower switch for approximately 2 seconds.
The blower speed 2 switch turns the blower on to medium-low
running speed. Pressing this switch a second time sets a timer
which keeps the blower operating at this speed for 10 minutes.
The LED will blink during this time and the blower will shut off
automatically.
The blower speed 3 and blower speed 4 switches operate the
same as blower speed 2 switch except:
Blower speed 3 is medium-high and blower speed 4 is high.
After every 30 hours of operation, the LED above the "blower
speed 1 switch" will be illuminated (RED) and blink for 30
seconds after turning off the blower. This is a reminder to
clean the grease filters. Once the grease filters are cleaned
and installed, press in and hold the "light switch" button for approximately 2
seconds during the blink of the LED.
9
Figure 1