Electrolux 50 Series Kullanıcı El Kitabı - Sayfa 7

Elektrikli Süpürge Electrolux 50 Series için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Electrolux 50 Series 8 sayfaları. Household type

Sayfayı Yazdır

Brush Roll

The rotating brush roll sweeps and combs the carpet nap. Keep the brush roll free from

hair and threads so it will continue to be effective.

NOTE: Turn off the switch and unplug the electrical cord before cleaning the

brush roll.

Brush Roll Belt

The brush roll belt drives the brush to agitate, sweep, and comb the carpet nap. Even

though the belt may not need to be changed often, it should be checked regularly to be

sure it is in good condition. Replace the belt if it is stretching, cracking, or slipping. Cut

away any hair or thread wound around the brush roll or the belt pulley because the

buildup could cause the belt to rotate unevenly.

NOTE: Turn off the switch and unplug the electrical cord before replacing belt.

Belt pulleys can become hot during normal use. To prevent injury, avoid

touching the belt pulley when servicing the drive belt.

Pull back on the release lever and gently

pry the nozzle cover from both sides of

the housing.

Place vacuum cleaner so nozzle

opening is in view. Loosen the screw and

pry off the belt view cover to remove

belt from motor pulley. Rotate the

brush roll guard down and off the

housing. Lift out brush roll.

Place belt around brush roll. Hold the

brush roll so the shortest section is on

the right side and the flat sides of the

end caps are aligned with slots in the

nozzle. Push brush roll into cleaner.

Place lower side of belt around left

side of motor pulley and rotate into

position.

Place hook on lower side of brush roll

guard into the knob on lower side of

nozzle. Rotate guard upward to position.

Hold belt view cover to top of the opening

and slide cover down into place. Snap

corners into position and secure with

screw.

Replace brush roll nozzle cover so the

release tab is on the right side of the

cleaner.

Additional belts are available from the Electrolux Customer Care line, 08706 055055.

71520

Belt

View

Cover

Nozzle

Cover

Brush Roll

Guard

Lever

Belt

View

Cover

Motor

Pulley

and

Belt

9/21/05, 10:09 AM