Atlantis Land NetFly 54 Hızlı Başlangıç Kılavuzu - Sayfa 13

Adaptör Atlantis Land NetFly 54 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Atlantis Land NetFly 54 16 sayfaları. Atlantis land netfly 54 a02-up1-w54(v1.1)_gx01 wireless usb adapter

Sayfayı Yazdır

1. UNPACKING AND SETUP

1.1 Unpacking

Open the box of the Wireless Adapter and carefully unpack it. The box

should contain the following items:

•

One Wireless USB Adapter

•

One Driver & Utility with User's Guide CD-ROM

•

One MultiLanguage Quick Start Guide

If any item is found missing or damaged, please contact your local reseller

for replacement.

1.2 Setup

The setup of the Wireless LAN Adapter can be performed using the

following steps:

•

Visually inspect the USB Adapter and make sure that it is fully

plugged in to the USB slot.

•

Make sure that there is a well environment that there is no much

intrusion to have a better connection.

2. HARDWARE INSTALLATION

The LEDs of the Wireless LAN Adapter are clearly visible and the status of

the network link can be seen instantly:

When connected to the USB port and the driver were installed, the

LNK LED will start blinking, and it means that the device is starting

to scan an 802.11g wireless device near the 802.11g Wireless

USB 2.0 Adapter.

While the 802.11g Wireless USB 2.0 Adapter linked up to the

Access Point or to other Wireless LAN station, the LINK LED will

always light up.

3. SOFTWARE INSTALLATION

Before insert the USB Dongle into USB port of your computer, please

install the Utility Program first. Make sure that the 802.11g Wireless

USB 2.0 Adapter is NOT inserted into the USB slot.

Insert the CD-ROM and the Auto-run program will appear.

Alternatively, open a file browser and double click on the

MultiLanguage QuickStart Guide

Wireless USB Adapter