Atlantis Land NetFly 54 Посібник із швидкого старту - Сторінка 13
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Адаптер Atlantis Land NetFly 54. Atlantis Land NetFly 54 16 сторінок. Atlantis land netfly 54 a02-up1-w54(v1.1)_gx01 wireless usb adapter
Друкувати сторінку1. UNPACKING AND SETUP
1.1 Unpacking
Open the box of the Wireless Adapter and carefully unpack it. The box
should contain the following items:
•
One Wireless USB Adapter
•
One Driver & Utility with User's Guide CD-ROM
•
One MultiLanguage Quick Start Guide
If any item is found missing or damaged, please contact your local reseller
for replacement.
1.2 Setup
The setup of the Wireless LAN Adapter can be performed using the
following steps:
•
Visually inspect the USB Adapter and make sure that it is fully
plugged in to the USB slot.
•
Make sure that there is a well environment that there is no much
intrusion to have a better connection.
2. HARDWARE INSTALLATION
The LEDs of the Wireless LAN Adapter are clearly visible and the status of
the network link can be seen instantly:
1.
When connected to the USB port and the driver were installed, the
LNK LED will start blinking, and it means that the device is starting
to scan an 802.11g wireless device near the 802.11g Wireless
USB 2.0 Adapter.
2.
While the 802.11g Wireless USB 2.0 Adapter linked up to the
Access Point or to other Wireless LAN station, the LINK LED will
always light up.
3. SOFTWARE INSTALLATION
Before insert the USB Dongle into USB port of your computer, please
install the Utility Program first. Make sure that the 802.11g Wireless
USB 2.0 Adapter is NOT inserted into the USB slot.
5.
Insert the CD-ROM and the Auto-run program will appear.
Alternatively, open a file browser and double click on the
MultiLanguage QuickStart Guide
Wireless USB Adapter
13