Atlas Copco PHE 26 Onarım Talimatları - Sayfa 3

Araçlar Atlas Copco PHE 26 için çevrimiçi göz atın veya pdf Onarım Talimatları indirin. Atlas Copco PHE 26 8 sayfaları.

Sayfayı Yazdır
1
Dismantling the
Carefully remove the bearing end plate (9)
gear box
from the gear box (2) (lever it off with aid
of a screwdriver).
2
Remove the gasket (3).
3
Expel the armature (8) by hitting the bear-
ing end plate (9) lightly with a plastic ham-
mer.
4
Remove the two screws (4).
5
Put the bearing end plate (9) onto a pad.
Press out the reduction gear shaft (1)
through the sun wheel (7) with aid of a
mandril.
6
Place the reduction gear wheel (6) to a
sleeve (repair tool set; service tool). Press
out the sun wheel (1) with aid of a screw
press.
7
Remove the gear wheel (6), the bearing
cover (5) and the bearing.
1
Dismantling the
Remove the intermediate wheel (8) with
snap die
aid of a plastic hammer and press off the
ball bearings at both sides.
2
Completely remove the locking ring, the
set collar (2), the O-ring (1), and the set
collar from the spindle gear.
3
Remove the O-ring (3), the disc (7), the
spring sleeve (4), the ball, and the sleeve
(6).
4
Remove the rolls (5) and both balls.
5
Applicable for the new SDS-Plus-System
(A): the rolls (5) are replaced by balls.
6
Press out the snap die (9).
Repair Instructions No.163.01/96
PHE 20 / PHE 26 / PHE 200
2
1
1
2
9
3 4
5
6
7
9
8
3
4
5
7
6
5
8
A
PAGE
2
3
4