Advanced Radio Smart Switch Hızlı Başlangıç Kılavuzu - Sayfa 12
Kontrol Paneli Advanced Radio Smart Switch için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Advanced Radio Smart Switch 15 sayfaları.
Sayfayı Yazdır
The Smart Display is a touch screen display. It has been pre-calibrated at the factory. Due to
variations in temperature and pressure, the Smart Display may become mis-aligned with the
touch pad. Screen calibration is used to realign the touch screen with the display.
WARNING
Screen calibration is a simple but extremely important process and could render
the Smart Switch unusable if done incorrectly. Only do this if the touch screen
does not respond properly when touched. We recommend you use a blunt fi-
ne point to follow this process. Avoid using a sharp object as it may damage the
screen. This process should be undertaken with caution.
Note
Before starting, find something with a fine
point, avoid using sharp items..
Step 1
Using the Smart Display, go into the sys-
tem menu, once here press the
button
12
Screen Calibration
Calibrate
Step 2
A warning and instructions will appear on
screen. Please Read this as it is an important
process. When ready press
or
No
to go back to the system screen.
Step 3
Small crosshairs will appear on the screen,
using the fine pointer. Press in the center of
each of the crosshairs. Once you have
pressed all the crosshairs, you will be taken
back to the system screen. You have now
finished the screen calibration.
Yes
to continue