Bose A20 Aviation Kullanıcı El Kitabı - Sayfa 24

Kulaklıklar Bose A20 Aviation için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Bose A20 Aviation 44 sayfaları. Aviation headset
Ayrıca Bose A20 Aviation için: Hızlı Referans Kılavuzu (2 sayfalar), Kullanıcı El Kitabı (44 sayfalar), Kullanıcı El Kitabı (43 sayfalar), Kullanıcı El Kitabı (40 sayfalar), Kullanıcı El Kitabı (44 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar)

Sayfayı Yazdır

Using the Headset

Secondary audio modes

If you have connected one or more secondary audio sources to the headset, you

must decide how you want to hear those secondary sources.

To select how you will hear your secondary audio sources, use the Secondary

Audio Mode selector on the control module.

Secondary Audio Mode selector

The selector has three positions: MUTE, MIX and OFF.

Position

MUTE

MIX

OFF

Note: Only one secondary source can be heard at a time. Audio from a secondary

source will never override intercom communications.

Note: Incoming and outgoing phone calls automatically mute all other secondary

audio sources (when the Secondary Audio Mode selector is in either the

MUTE or MIX position). During a Bluetooth phone call, the intercom and the

phone call will be heard as mixed.

24 - English

Function

Intercom prioritized

over any secondary

audio sources

Intercom mixed with

any secondary audio

sources

Intercom only

Note: In OFF mode,

Bluetooth

power is

disconnected,

and all

antennae are

disabled.

Description

If an intercom signal is detected, all

secondary audio sources are temporarily

muted. Secondary audio will return after

intercom audio ceases.

Also see "Managing multiple secondary

sources" on page 25.

All secondary audio sources are mixed with

the intercom audio. (Audio from a connect-

ed device will keep playing during intercom

communications).

Note: In MIX mode, you will hear a

maximum of two audio sources – the

intercom plus one secondary source.

Also see "Managing multiple secondary

sources" on page 25.

Only intercom audio is active. All secondary

audio sources are off.

Note: If you switch to OFF mode while

connected to a Bluetooth source,

you many need to re-establish your

Bluetooth connection the next time

you turn on the headset.