Bose Aviation Headset X Kullanıcı El Kitabı - Sayfa 14

Kulaklıklar Bose Aviation Headset X için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Bose Aviation Headset X 36 sayfaları. Owner's guide
Ayrıca Bose Aviation Headset X için: Hızlı Kurulum Kılavuzu (1 sayfalar), Kullanıcı El Kitabı (36 sayfalar), Kullanıcı El Kitabı (16 sayfalar), Kullanıcı El Kitabı (36 sayfalar)

Getting Your Headset Ready for Use

Figure 10

Installing the two batteries

Inserting batteries

Insert the two supplied alkaline AA batteries (IEC LR6) into the

control module (Figure 10).

CAUTION: The battery compartment is designed to prevent inad-

vertent reverse polarity from installing the batteries incorrectly. If the

batteries do not seem to ﬁt correctly, do not force them in. Forcing an

improper connection will cause permanent damage to the control

module.

For an aircraft powered headset, the cable is permanently installed in

the aircraft.

CAUTION: The aircraft panel connector must be mounted by a

mechanic qualiﬁed to perform this type of avionics installation for the

aircraft you are using.

If yours is an aircraft powered headset, there is a connector on a 6-

foot wiring harness that came in the carton. This self-latching, preci-

sion designed quick-connector is designed for panel mounting and

mechanically keyed to ensure proper mating.

When the quick-connector is installed, the cable leading from the

control module connects to it. Match the narrow bar on the cable

end to the slot on the connector. Press in until the two parts engage

(Figure 11 on page 15).

To release the cable, pull back on the sleeve near the end of the

cable. Then gently remove the cable from the connector.

AM270261_00 V.pdf May 16 2003